Tormach Path Pilot Hand Held Console

CNC Control Pendant that functions as a hand held console for Tormach Path Pilot CNC machines. It is 100% plug and play, requiring no modifications to the Path Pilot controller software. It connects to Path Pilot via a USB cable.

Includes a black rubber boot and 2 neodymium magnets for securely holding  to your machine. 

Requirements: 

• Path Pilot 2.51 or newer.
  
• 1 Available USB Port on your Path Pilot Controller

Machine Compatibility:

Full plug and play compatibility for machines that Tormach does not offer an Operators Console, is it at Tormach's discretion. Please email support@madewithcnc.com if you have any questions. 

• All M Series Mills**
• All 770 Series Mills
• PCNC 440 Mill
• All Series 3 Mills (PCNC 1100 serial number 2000 or higher)
• Series 2 Mills that have the Series 3 Motion Control Upgrade installed*
• 15L Slant Pro and 8L Lathes
• 24R
• 1300PL Plasma Table

 *future testing planned to confirm if Series 2 Mills without the Series 3 Motion Control Upgrade are compatible.

** The Hand Held Console is not compatible with machines that have a Tormach Operators Console attached.

Features:

• Feed Override (0% - 200%) 
• Spindle Speed Override (0% - 200%) 
• Rapid Override (0% - 100%) 
• Jog Axis Selection*
• Jog Step Selection
• Jog Wheel
• Cycle Start Button
• Feed Hold Button
• Program Stop
  
• Coolant On/Off*

*for machines without coolant, the Coolant On/Off button is non-operational

*consoles with the new labels the R2 axis will select the same axis as R1 for jogging. Path Pilot does not support 2 different rotary axis.

Please note: Made With CNC products are not tested, sponsored, endorsed, nor approved by Tormach Inc.